Test method for light touch switch with lamp
Release time：2019-07-20 Clicks： Click
The light touch switch needs to be tested when it is in use. How should it be tested? Let's give you a detailed introduction.
Test Standard State of Light Touch Switch with Lamp
Light touch switch with lamp is to switch the circuit on or off by switching the switch handle, so as to achieve the purpose of switching the circuit.
The common types of light touch switch with lamp are unipolar bipolar, unipolar triple, bipolar bipolar and bipolar triple. It is generally used in low voltage circuit, and has the characteristics of flexible action of slider, stable and reliable performance.
Light touch switch with lamp is mainly used in various instruments/instruments, various electric toys, fax machines, audio equipment, medical equipment, beauty equipment, and other electronic products.
Mechanical performance specifications:
A. The routine motor force is 250+50gf.
B. The terminal strength switch should be strengthened on the front end of any direction (500gf) for 1 minute. There are no abnormalities in the foot of the row, such as cracking, buckling, etc. Requirements: Meet the mechanical and electrical performance.
C. Test Standard State
The test temperature, humidity and air pressure of the light touch switch are as follows:
(1) Temperature ranges from 5 ~35.
(2) Humidity is 45%~85%.
(3) Pressure 80 Kpa~106 Kpa