How to avoid interference when installing headphone socket
Release time：2019-07-06 Clicks： Click
When installing headphone socket, we should pay attention to avoiding interference. What should we do? Let's give you a detailed introduction.
When installing headphone sockets, it is necessary to prevent interference between adjacent groups and each other. The most effective way to prevent interference is to cross-set the projector and the receiver, and to open the group spacing when exceeding the group. Of course, the use is different.
Frequency machine is also a good way. The best way to prevent mutual interference of reflective photoelectric switch is to open the interval.
The farther the headphone socket detection distance is, the greater the interval should be. The specific interval should be determined according to the actual debugging situation.
Of course, different types of machines with different working frequencies can also be used. Mirror angle effect: When the measured object appears glossy or encounters smooth metal surface, the general reflectivity is very high, there is a mirror-like effect.
At this time, the angle between the projector and the detected object should be installed so that the optical axis of the projector is not perpendicular to the detected object, so as to prevent misoperation.