金沙国际唯一官网-澳门百乐门-首页

CLASSIFY
Industry information
Location:Home > English > News > Industry information >
What should we pay attention to when using micro switch

Release time:2019-05-25    Clicks: Click

 
There are some problems that need to be paid attention to when the micro switch is in use. What are the specific ones? Let's give you a detailed introduction.
金沙国际唯一官网
Many friends are using the micro switch, but some specific points of attention are not understood, resulting in a lot of unnecessary troubles later, the following small edition to give you a trusted introduction.
Notes for the use of micro-switch:
1. When fixing the main body of the switch, use the small screw of M2 to fix it on the smooth surface with the torque below 0.098N.m. In addition, in order to prevent screw loosening, it is recommended to use gaskets at the same time.
2. Please note that the action body should not exert force directly on the button or the actuator in the free state, but should exert force in the vertical direction when using the button.
3. The action setting after the action is based on the standard of more than 70 [%] of O.T. value. In the case of switch, do not set the action body at the action limit position, so as to avoid the impact of the accompanying opening and closing, and shorten the life of the trip.
Product display
Click here to send me a message

金沙国际唯一官网|澳门百乐门

XML 地图 | Sitemap 地图