Installation Procedures of Professional Light Touch Switch Maintenance Personnel
Release time：2019-03-27 Clicks： Click
What should professional lightly touch switch maintenance personnel pay attention to when installing lightly touch switch? What are the specific installation steps? Let's give you a detailed introduction.
As a more professional maintenance personnel, the function, model, principle, welding and use of electronic components must be very well understood, in order to be able to competent for maintenance work, then, when installing light switch, maintenance personnel should pay attention to what aspects?
First of all, take it lightly. These electronic components belong to more precise and compact objects. They are mainly composed of metal parts and plastic parts according to a certain structure. If they are used violently, it is easy to cause the loosening of the plastic parts and the damage of the whole components.
Second, pay attention to the control of heat. Because most of the light touch switches belong to plastic structure, which is easy to be damaged not only by violence, but also by melting in the case of overheating. Therefore, we should pay extra attention to temperature control when we install them on the circuit board by using related heating equipment such as Luotie. The temperature is too low, the components can not be installed smoothly, and the temperature is too high. It is easy to damage components.
Thirdly, when we put the touch switch on the circuit board, we need to weld for the second time. The same principle, grasping the temperature well, we also need to learn to cooperate with both hands to ensure that the installation of the whole component is stable, and there is no phenomenon of welding leakage, soldering, loosening and tilting.
Finally, when the installation is completed, the parts and components of the whole electronic product need to be combined in a certain order. After checking, it is confirmed that there are no installation errors. Then the plug-in operation is carried out, and the switch is pressed lightly. If it can be used normally, it means that the installation is correct. If it can not be used normally, it is necessary to unplug the power supply and reinstall it to ensure the normal installation work. Conduct.