金沙国际唯一官网-澳门百乐门-首页

CLASSIFY
Industry information
Location:Home > English > News > Industry information >
How to test the performance of light touch switch

Release time:2019-03-07    Clicks: Click

 
How to test the performance of the light touch switch is appropriate, especially the light touch switch. Specific test methods are described below.
金沙国际唯一官网
Five commonly used methods for testing the performance of touch switches are introduced in detail. The specific contents are as follows:
Moisture resistance test method: Put it in 40 + 2 C 90 - 95% RH environment for 4 days, then put it in normal environment, and test it 30 minutes later.
Test Standard: Contact resistance and insulation resistance are within the standard range, and there is no indication of performance damage of the switch.
Cold-resistant test method: put it in the temperature environment of minus 20 3 for 4 days, then put it in the normal environment, and test it after 30 minutes.
Test Standard: Contact resistance and insulation resistance are all within the standard range, and there is no indication that the switch performance is damaged.
High temperature resistance test method: under the environment of 280 30 C, the product will be stored for 2 - 3 minutes and taken out. After heat dissipation, the handle and resistance of the product will be tested.
Test criteria: Resistance, resilience, shape, etc. There is no sign of damage to the light touch switch. The performance of the switch is as good as before. The soft rubber light touch switch is supplied.
Weldability test method: The welding foot is soaked into a tin pool about 2 mm deep, and the test temperature is about 230 5 C, and the holding time is 3 0.5 seconds.
Test Standard: More than 80% of the solder foot will be covered by tin.
Welding resistance test mode: the temperature of solder in furnace is controlled at 260. 5 seconds, while the time of over-furnace welding is maintained at 5. 1 seconds, while the temperature is controlled at 350. 30 and the time is 3 0. 5 seconds, but abnormal pressure can not be exerted on the
Test Standard: The switch has no deformation and can satisfy the performance of electrical appliances. The result of applying abnormal pressure is invalid.
The use of light touch switch with lamp is more and more popular and widespread. The light touch switch with lamp has a certain sense of hand. Different intensity of use time can achieve different effects. Especially when the intensity tolerance range of light touch switch is relatively small, its feel will be better. The eight advantages of light touch switch with lamp are the most prominent characteristics of light touch switch with lamp.
The precision of the shrapnel is also very important when the switch is touched lightly with a lamp. The function of the shrapnel is to control the switch with a lamp. If a single shrapnel has a problem, the switch can not be used normally.
The detection method of light touch switch with lamp is very simple, as long as it is touched or pressed lightly, and the sensitivity of the reaction can be observed. Whether it is a large type light touch switch with lamp or a small type light touch switch with lamp, it can make people feel the simple operation and light touch switch supply.
Many materials with light touch switch have the effect of dust-proof and electricity-insulating. They should be carefully maintained in daily use. People can start with light touch switch, which is the insulating material, to eliminate more hidden dangers of light touch switch. In daily maintenance and detection of light touch switch, we should pay attention to whether the light touch switch becomes fragile and deteriorated because of time aging. Quality problems such as decreased sensitivity or cracking.
If there is abnormal operation of light touch switch, remember not to disassemble it without authorization. This is a very dangerous practice. There is no professional maintenance environment. Many high-end electrical products need to be opened in a dust-insulated environment, because the dust will have conductive effect, so the detection and maintenance of light touch must be in a special environment. Conduct.
Because of the high sensitivity of light touch switch, we should pay attention not to over-squeeze when pressing, because both the control button on the precision instrument and the simple button on it have the same principle. When using the light touch switch, the sensitivity of light touch switch itself will be reduced if the light touch switch is pressed or struck vigorously.
Product display
Click here to send me a message

金沙国际唯一官网|澳门百乐门

XML 地图 | Sitemap 地图