Method of Correctly Testing Service Life of Light Touch Switch
Release time：2019-01-18 Clicks： Click
How to test the service life of light touch switch correctly, which can effectively determine the service life of our products. Specific methods are described in detail below.
The light touch switch is realized by pressing the internal hardware shrapnel on the moving handle, which is called travel, that is, the distance between shrapnel and shot point. Pressing the secondary hand is called the life of the switch. At present, the life standard of the switch is 10W times. We often tell you that the key to the life of the switch is its shrapnel. The material quality and precision of shrapnel is one of the important factors affecting the life of shrapnel, and also an important factor affecting the feel of hand. So is our life expectancy judged by the quality of shrapnel? Obviously not. The material we choose is only theory. The actual use should be based on our test results. Today, we will introduce the life style and test standards for you.
Standard method and process of life test for touch switch: Firstly, we fix the switch on the panel of the machine, secondly, we adjust the weight to set the number of life times, and then measure the conductivity and handle of the test switch by the number of life times. Life Test Standard: The weight of the weight is twice the switching force, and the switch is pressed at a frequency of 30-40 times per minute. After testing the mechanical performance, the electrical performance of the switch is tested. If the stop is higher than 30m Euro after the test, it will be judged as bad, but it will be judged as good. After the life test, it will also be tested whether the switch can be turned on and pressed, and whether the hand feel is good. A good light touch switch manufacturer, every batch of switches produced must undergo life testing to ensure the stability of the switch.