Touch switch is a quick choice.
Release time：2018-10-09 Clicks： Click
Light touch switch quick selection has a great trick, not a lot of time, just look at the key, you can select a good light touch switch, how to select it? The following is a detailed introduction to you.
The manufacturer of the light touch switch expounds an electronic switch which can be switched on by pressing the switch button lightly when used. The switch is disconnected when the hand is loosened. The internal structure of the switch is realized by the force elasticity of the metal fragment.
The manufacturer of the light touch switch introduces that the light touch switch can change the state of the switch contact without much contact, so the contact capacity is very small, and the structure is simple, the switch force can only be removed to maintain the original state, that is to say, quite a small force can be pressed, without locking the single contact point press Button switch, at present, film switch, small micro-switch can be regarded as light touch switch, mostly using two insulated film printed conductive circuit, by pressing the line to connect each other, or the use of thin elastic metal made of butterfly-shaped shrapnel, press the moving shrapnel to connect the printed circuit.
How important is the selection method for tactile switches? A good touch switch is also very important for the life of the 5.6 kW UV transformer product. For example, computer keyboard, remote control and so on. If it is a poor quality light touch switch, after frequent press will make the metal fragment fatigue loss of elasticity and failure. Therefore, the selection of tactile switches is very important. The key factors influencing the quality of the light touch switch are the protection, solderability, conduction reliability, service life, handle of the manual spray gun, production process and installation size of the light touch switch. Touch switch.