Installation method and installation position of heat-resistant DC socket
Release time：2018-08-01 Clicks： Click
Heat-resistant DC socket should be how to install, installed to what location is better, today to give you a detailed introduction in this respect.
The location and quantity of heat-resistant DC socket are determined to facilitate the use of household appliances. The beauty of the interior decoration plays an important role. The layout of the power outlet should be based on the planning position of the indoor electrical appliances and furniture, and should pay close attention to the related professional cooperation with the building decoration so as to determine the correctness of the socket position.
1. heat resistant DC socket should be installed on no less than two symmetrical walls. The horizontal distance between two power outlets for each wall is not more than 2.5m to 3m, and the distance from the end wall should not exceed 0.6m.
2. Installation of common power socket 0.3 m from the ground without special requirements, installation of special socket for washing machine 1.6 m from the ground, and with indicator lights and switches;
3. air conditioner should adopt special belt switch power outlet. In the case of a certain type of air conditioner, the outlet of the air conditioner should be arranged in the following locations:
The power outlet of split type air conditioner should be set according to the location of the outlet hole of the outlet pipe from the 1.8m of the ground.
2. Window air conditioner power outlet should be set at 1.4m from the window side.
3. The outlet of the cabinet air conditioner should be set at the corresponding location from the 0.3m of the ground. Otherwise, the 16A power socket should be reserved according to the split air conditioner, and set up on the load-bearing wall near the outer wall or the lighting window.
The installation details of the heat-resistant DC socket are like this. The specific location is controlled by everyone.