金沙国际唯一官网-澳门百乐门-首页

CLASSIFY
Industry information
Location:Home > English > News > Industry information >
Specific parameters and wiring methods for DC011 sockets

Release time:2018-06-30    Clicks: Click

 
Today we will explain to you a kind of DC011 socket which is often used. This socket has a lot of less understanding of the specific parameters and wiring methods. Today we introduce it to everyone. I hope you like this method.
金沙国际唯一官网
The DC socket is an industrial special power supply socket, which is different from the general household socket. Its DC socket is quite different in terms of specification types. For example, DC socket can be divided into patch DC power socket, plug-in DC power socket. Secondly, according to the size of the socket pin, it is divided into 2.5 DC sockets, 3 DC sockets and 3.5 DC sockets. However, in general, when we buy DC socket, it is customary to call some types of sockets, such as DC011 socket, dc005 socket, dc062 and so on. Next, we will give you a detailed introduction of the DC011 socket product interpretation and instructions.
Product introduction
DC power socket DC-011 is mainly used in the fields of TV, video player, stereo, recorder, computer and other household electrical appliances.
DC-011 technical parameters of DC socket
Ambient temperature: 15~35 C
Pressure: 86kPa~106kPa
Relative humidity: 25%~80%
Insertion strength: 2.94~29.4N
Pull out strength: 2.94~29.4N
Rated value: DC 12V 1A
Contact resistance: less than 0.03 Omega
Insulation resistance: > 100M Omega
Connection method of DC011 socket
The DC socket is generally composed of three pins. The definition of the socket pin is that the first pin represents the power positive (also the middle pin), the second pin is the negative static contact and the third pin is the negative moving contact (2 and 3 pins are about two pins). Next, the DC socket pin wiring method is that the pin in the middle of the socket is the grounding wire, and the other two ends are connected to the power line and the zero line respectively. The order of wiring is usually based on the statement of left, zero and right fire, meaning that the pin on the left is connected with the zero line, and the right side of the pin is connected with the fire line.
DC011 socket use instructions
1. if the pin of the DC socket has a fissure phenomenon, it should be replaced immediately, or the current transmission between pins in the socket is unstable, resulting in sparks in the socket and so on, which may cause an explosion to cause a fire.
2. generally in the use of DC socket, to check the work voltage and the working current and the power of the socket and the power of the socket, if not consistent, in use when the DC socket outlet between the internal lines can not load its working current and lead to the DC socket cause fire and other phenomena.
3.dc socket hole, to avoid contact with water droplets invasion, whether the socket inside the circuit will cause short-circuit and other failures.
Remember before also has given you a detailed description of the meaning and role of DC sockets and other knowledge points, the above DC011 socket product introduction and use of instructions on this, next in the use of DC011 socket, can not change the use of other specifications of DC socket. Because for different specifications of DC sockets, there are differences in functionality, so the scenarios are different. If the DC socket is not suitable, it will not only affect the performance of the DC socket, but also lead to damage to the socket.
Product display
Click here to send me a message

金沙国际唯一官网|澳门百乐门

XML 地图 | Sitemap 地图